The M906-02 is a PLL (Phase Locked Loop) based clock generator that uses an internal VCSO (Voltage Controlled SAW Oscillator) to produce a very low jitter output clock. From the M906-02-155.5200, an output clock frequency of 155.52 or 77.76MHz is provided from six LVPECL clock output pairs. (Other frequencies are available; consult factory.) The accuracy of the output frequency is assured by the internal PLL that phase-locks the internal VCSO to the reference input frequency (19.44MHz for the M906-02-155.5200). The input reference can either be an external crystal, utilizing the internal crystal oscillator, or a stable external clock source such as a packaged crystal oscillator.
- Output clock frequency range 75MHz to 175MHz (Consult factory for frequency availability)
- Selectable divider chooses one of two frequencies
- Six identical LVPECL output pairs (same frequency)
- Jitter 0.7ps rms (at 155.52MHz, over 12kHz-20MHz), typ.
- Ideal for OC-48/STM-16 clock reference
- Output-to-output skew < 100ps
- External XTAL or LVCMOS reference input
- Selectable external feed-through clock input
- STOP clock control (Logic 1 stops output clocks)
- Integrated SAW (surface acoustic wave) delay line
- Single 3.3V power supply
- Small 9 x 9 mm SMT (surface mount) package