Flexible output current capabilities are key to address modern multi core SoC solutions with a variety of different skews. The IDT P9148 distributed power units (DPU) operate as additional phases to the P91E0A PMIC to increase the output current of the solution. The device works as a controlled current source fully controlled by the host PMIC. Multiple P9148 devices may be used in parallel to provide additional current to the load. A high-speed proprietary interface between the P91E0A and the P9148A provides control and feedback information. The device seamlessly integrates into the PMIC eco-system and is flexible and transparent to the user. P9148A has been designed for systems with single 5V supply available and supports features such as optional thermal limit warning flag, load current monitor and automatic load-balancing among phases).

Features

  • Single 4.5V to 8.4V input voltage range
  • Output voltage controlled by host PMIC  (P91E0A)
  • Up to 6A peak output current per device/phase
  • 2.0MHz switching frequency, internal PWM generation
  • Support automatic phase-shedding, PFM and LDO modes
  • Simple 2-wire interface for device configuration, control and status exchange to the host PMIC
  • Automatic detection by Host PMIC
  • No analog feedback to PMIC required
  • Thermal limit warning flag and load current monitor capability optional
  • Automatic load-balancing and heat re-distribution among phases optional
  • Digital modulation and ML-based error correction
  • Industrial temperature range of -40°C to +85°C
  • 3 × 4 mm 12-DFN (NRG12)

Product Options

下单器件 ID Part Status Pkg. Type Lead Count (#) Carrier Type Temp. Grade Pb (Lead) Free 封装 Buy Sample
P9148ANRGI8 Active DFN 12 Reel I 是的 Package Info
Availability

Documentation & Downloads

文档标题 他の言語 Type 文档格式 文件大小
数据手册与勘误表
P9148A Datasheet Datasheet PDF 720 KB
应用指南 &白皮书
IDTP914x Layout Guide ( 简体中文) English Application Note PDF 428 KB
IDTP914x Layout Guide ( 简体中文) English Application Note PDF 428 KB