The 5P49EE802 is a programmable clock generator intended for low power, battery operated consumer applications. There are four internal PLLs, each individually programmable, allowing for up to eight differrent output frequencies. The frequencies are generated from a single reference clock. The reference clock can come from either a TCXO or fundamental mode crystal. An additional 32kHz crystal oscillator is available to provide a real time clock or non-critical performance MHz processor clock. The 5P49EE802 can be programmed through the use of the I2C interfaces. The programming interface enables the device to be programmed when it is in normal operation or what is commonly known as in system programmable. An internal EEPROM allows the user to save and restore the configuration of the device without having to reprogram it on power-up. Each of the four PLLs has an 8-bit reference divider and a 11-bit feedback divider. This allows the user to generate four unique non-integer-related frequencies. The PLL loop bandwidth is programmable to allow the user to tailor the PLL response to the application. For instance, the user can tune the PLL parameters to minimize jitter generation or to maximize jitter attenuation. Spread spectrum generation is supported on one of the PLLs. Spread spectrum generation is supported on one of the PLLs. The device is specifically designed to work with display applications to ensure that the spread profile remains consistent for each HSYNC in order to reduce ROW noise. It also may operate in standard spread sepctrum mode. There are total seven 8-bit output dividers. Outputs are LVCMOS. The outputs are connected to the PLLs via the switch matrix. The switch matrix allows the user to route the PLL outputs to any output bank. This feature can be used to simplify and optimize the board layout. In addition, each output's slew rate and enable/disable function can be programmed.

Features

  • Four internal PLLs
  • Internal non-volatile EEPROM
  • Internal I2C EEPROM master interface
  • FAST (400kHz) mode I2C serial interfaces
  • Input Frequencies – TCXO: 10 MHz to 40 MHz – Crystal: 8 MHz to 30 MHz – RTC Crystal: 32.768 kHz
  • Output Frequency Ranges: kHz to 120 MHz
  • Each PLL has an 8-bit reference divider and a 11-bit feedback-divider
  • 8-bit output-divider blocks
  • One of the PLLs support Spread Spectrum generation capable of configuration to pixel rate, with adjustable modulation rate and amplitude to support video clock with no visible artifacts
  • I/O Standards: – Outputs - 1.8V/2.5V/3.3 V LVTTL/ LVCMOS
  • 3 independent adjustable VDDO groups.
  • Programmable Slew Rate Control
  • Programmable Loop Bandwidth Settings
  • Programmable output inversion to reduce bimodal jitter
  • Individual output enable/disable
  • Power-down/Sleep mode – 10μA max in power down mode – 32kHz clock output active sleep mode – 100μA max in sleep mode
  • 1.8V VDD Core Voltage
  • Available in 28 pin 4x4mm QFN packages
  • -40 to +85°C Industrial Temp operation

Product Options

Orderable Part ID Part Status Pkg. Code Pkg. Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type Buy Sample
5P49EE802NDGI Not Recommended for New Designs NDG28 VFQFPN 28 I Yes Tube
Availability
5P49EE802NDGI8 Not Recommended for New Designs NDG28 VFQFPN 28 I Yes Reel
Availability

Technical Documentation

Title Other Languages Type Format File Size Date
Datasheets & Errata
5P49EE802 Datasheet Datasheet PDF 222 KB
User Guides & Manuals
Timing Products for NXP (Freescale) i.MX 简体中文 Guide PDF 321 KB
VersaClock-LP Low Power Eval Board Setup Guide Manual - Eval Board PDF 73 KB
Application Notes & White Papers
AN-828 Termination - LVPECL Application Note PDF 229 KB
AN-918 Programmable Clocks vs Crystal Oscillators Application Note PDF 221 KB
AN-831 The Crystal Load curve Application Note PDF 308 KB
AN-845 Termination - LVCMOS Application Note PDF 62 KB
AN-844 Termination - AC Coupling Clock Receivers Application Note PDF 82 KB
AN-842 Thermal Considerations in Package Design and Selection Application Note PDF 403 KB
AN-835 Differential Input with VCMR being VIH Referenced Application Note PDF 77 KB
AN-803 Crystal Timing Budget and Accuracy for IDT Timing Clock Products Application Note PDF 44 KB
AN-840 Jitter Specifications for Timing Signals Application Note PDF 349 KB
AN-839 RMS Phase Jitter Application Note PDF 149 KB
AN-838 Peak-to-Peak Jitter Calculations Application Note PDF 32 KB
AN-834 Hot-Swap Recommendations Application Note PDF 67 KB
AN-837 Overdriving the Crystal Interface Application Note PDF 50 KB
AN-836 Differential Input to Accept Single-ended Levels Application Note PDF 37 KB
AN-832 Timing Budget and Accuracy Application Note PDF 48 KB
AN-830 Quartz Crystal Drive Level Application Note PDF 59 KB
AN-827 Application Relevance of Clock Jitter Application Note PDF 1.06 MB
AN-815 Understanding Jitter Units Application Note PDF 476 KB
AN-802 Crystal-Measuring Oscillator Negative Resistance Application Note PDF 52 KB
AN-805 Recommended Ferrite Beads Application Note PDF 38 KB
AN-801 Crystal-High Drive Level Application Note PDF 109 KB
AN-806 Power Supply Noise Rejection Application Note PDF 353 KB
PCNs & PDNs
PCN# : A1711-01 Add ASECL as Alternate Assembly for Select Devices Product Change Notice PDF 30 KB
Other
VersaClock Family Overview 日本語 Overview PDF 803 KB
Timing Solutions Products Overview Overview PDF 4.11 MB
IDT Products for Radio Applications 日本語 Product Brief PDF 2.34 MB
IDT Clock Generation Overview 日本語 Overview PDF 1.83 MB
IDT Clock Distribution Overview 日本語 Overview PDF 3.79 MB
5P49EE802 Eval Board Schematic Schematic PDF 72 KB
VersaClock III Eval Board Schematics Schematic PDF 80 KB
VersaClockLowPower-ProgrammableClocks Product Brief PDF 1.25 MB
VersaClock3-ProgrammableClocks Product Brief PDF 1.61 MB
DesignTip-SpreadSpectrumClocking-VersaClock3 Product Brief PDF 199 KB

Software & Tools

Title Other Languages Type Format File Size Date
VersaClock 4.3 for Windows XP Service Pack 2&3 32-bit Software ZIP 118.00 MB
VersaClock 4.3 for Windows Vista Service Pack 2 64-bit Software ZIP 117.74 MB
VersaClock 4.3 for Windows Vista Service Pack 2 32-bit Software ZIP 117.74 MB
VersaClock 4.3 for Windows Vista RTM & Service Pack 1 64-bit Software ZIP 117.74 MB
VersaClock 4.3 for Windows 7 Professional 64-bit Software ZIP 117.74 MB
VersaClock 4.3 for Windows Vista RTM & Service Pack 1 32-bit Software ZIP 117.74 MB
VersaClock 4.3 for Windows 7 Professional 32-bit Software ZIP 118.54 MB