The IDT8V89308I is a PLL based synchronous multiplier specifically designed for applications utilizing Broadcom PHYs and Switches. This high performance device is optimized for Ethernet / SONET PDH frequency translation and clock jitter attenuation. The device contains two internal frequency multiplication stages that are cascaded in series. The first stage is a low bandwidth PLL that is optimized to provide reference clock jitter attenuation. The second stage is a FemtoClock® frequency multiplier that provides the low jitter, high frequency Ethernet output clock that easily meets Gigabit and 10 Gigabit Ethernet jitter requirements. Pre-divider and output divider multiplication ratios are selected using device selection control pins. The multiplication ratios are optimized to support most common clock rates used in Ethernet, SONET, PDH applications. IDT8V89308I requires the use of an external, inexpensive fundamental mode crystal and uses external passive loop filter components which allows configuration of the PLL loop bandwidth and damping characteristics. The device is packaged in a space-saving 32-VFQFN package and supports industrial temperature range.

Features

  • Two LVPECL output pairs Each output supports independent frequency selection at 25MHz, 125MHz and 156.25MHz
  • One differential input supports the following input types: LVPECL, LVDS
  • Accepts input frequencies 8kHz, 25MHz,125MHz and 155.52MHz
  • First stage PLL bandwidth can be optimized for jitter attenuation and reference tracking using external loop filter connection
  • FemtoClock frequency multiplier provides low jitter, high frequency output
  • Absolute pull range: 50ppm
  • FemtoClock VCO frequency: 625MHz
  • RMS phase jitter @ 25MHz, using a 25MHz crystal (12kHz '- 5MHz): 0.238ps (typical), 0.30ps (maximum)
  • RMS phase jitter @ 125MHz, using a 25MHz crystal (12kHz '- 20MHz): 0.223ps (typical), 0.30ps (maximum)
  • RMS phase jitter @ 156.25MHz, using a 25MHz crystal (12kHz '- 20MHz): 0.223ps (typical), 0.30ps (maximum)
  • 3.3V supply voltage
  • -40°C to 85°C ambient operating temperature
  • Available in lead-free (RoHS 6) package

Product Options

Orderable Part ID Part Status Pkg. Code Pkg. Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type Buy Sample
8V89308ANLGI Active NLG32P1 VFQFPN 32 I Yes Tray
Availability
8V89308ANLGI8 Active NLG32P1 VFQFPN 32 I Yes Reel
Availability

Technical Documentation

Title Other Languages Type Format File Size Date
Datasheets & Errata
8V89308I Data Sheet Datasheet PDF 603 KB
Application Notes & White Papers
AN-861 Recommended Crystals for IDT VCXO-based Synchronization PLLs Application Note PDF 214 KB
AN-828 Termination - LVPECL Application Note PDF 229 KB
AN-831 The Crystal Load curve Application Note PDF 308 KB
AN-842 Thermal Considerations in Package Design and Selection Application Note PDF 403 KB
AN-835 Differential Input with VCMR being VIH Referenced Application Note PDF 77 KB
AN-840 Jitter Specifications for Timing Signals Application Note PDF 349 KB
AN-839 RMS Phase Jitter Application Note PDF 149 KB
AN-838 Peak-to-Peak Jitter Calculations Application Note PDF 32 KB
AN-836 Differential Input to Accept Single-ended Levels Application Note PDF 37 KB
AN-830 Quartz Crystal Drive Level Application Note PDF 59 KB
AN-827 Application Relevance of Clock Jitter Application Note PDF 1.06 MB
AN-815 Understanding Jitter Units Application Note PDF 476 KB
AN-802 Crystal-Measuring Oscillator Negative Resistance Application Note PDF 52 KB
AN-805 Recommended Ferrite Beads Application Note PDF 38 KB
AN-801 Crystal-High Drive Level Application Note PDF 109 KB
AN-806 Power Supply Noise Rejection Application Note PDF 353 KB
PCNs & PDNs
PCN# : A1807-01 Gold wire to Copper Wire Product Change Notice PDF 32 KB
PCN# : A1611-02 Add JCET China as Alternate Assembly and Change of Material Set at Alternate Assembly Location Product Change Notice PDF 583 KB
PCN# : A1511-01(R1) Add SPEL India as Alternate Assembly Location Product Change Notice PDF 596 KB
PCN# : A1511-01 Add SPEL India as Alternate Assembly Location Product Change Notice PDF 544 KB
PCN# : W1308-01 Change of Passivation Thickness Product Change Notice PDF 941 KB
PCN# : N1302-01 Die revision change Product Change Notice PDF 55 KB
Other
Timing Solutions Products Overview Overview PDF 4.11 MB
IDT Clock Generation Overview 日本語 Overview PDF 1.83 MB
IDT Clock Distribution Overview 日本語 Overview PDF 3.79 MB

Software & Tools

Title Other Languages Type Format File Size Date
8V89308I 3.3V IBIS Model Model - IBIS ZIP 45 KB