PCIe2 to S-RIO2 Evaluation Board

The IDT Tsi721-16GEBI  Evaluation Board is a prototyping platform that leverage’s IDT’s Tsi721 PCIe®  to RapidIO® Gen2 bridge as well as the CPS-1432 RapidIO Gen2 switch, allowing any PCIe processor to communicate to an S-RIO network. The Tsi721-16GEBI Evaluation board has a variety of interfaces that allows customers to interface DSPs, Microprocessors, and FPGAs to IDT switches, and also allows for x86 processors to interface to an S- RIO network through the Tsi721 bridge. Interfaces include AMCs, SMAs, InfiniBand/CX4 and SFP+ connectors. This allows customers to implement most network configurations that represent their production hardware in a logically equivalent manner. By doing so, systems firmware and software engineers can start implementing their code before production hardware is available thereby accelerating development cycles and time to market. 

The Tsi721-16GEBI evaluation board can network together multiple processors in individual PCs. Each PC is populated with a Tsi721 evaluation board. Each evaluation board is networked together over S-RIO, allowing for a cluster of PCIe enabled x86 processors over S-RIO.

The Tsi721-16GEBI evaluation board comes equipped with RapidFET JTAG, a software tool that can configure IDT switches and bridges out of band via the JTAG interface on the board, making access to registers simple via a user friendly Graphical User Interface.


  • Industry-standard system interconnect connectors 
    • One PCIe x4 connector
    • One AMC B+ connector: x4 S-RIO links, Ports 4–7, 8–11, and 17-20 (No support for IPMC and JTAG)
    • Two SFP+ connectors: x1 S-RIO links
    • Two InfiniBand/CX4 connectors: x4 S-RIO links
    • One SMA array (x4 S-RIO link)
  • JTAG and  I2C 
    • JTAG header: 0.1” 10-pin headers
    • I2C header: 0.1” 10-pin header 
    • One I2C EEPROM per S-RIO device 
    • On-board USB to JTAG/I2C converter (FTDI FT2232HL)

Product Options

Orderable Part ID Part Status Buy Sample
TSI721-16GEB Active Availability