What are the specifications for the terminal plating, plating methods and plating thickness for any IDT part?

For all IDT parts that comply with the Green Product RoHS material declaration:

  • The terminal finish are matte Sn (100%).
  • The base material is Cu alloy.
  • There is no nickel underplate.
  • The annealing condition is of 150°C for 1 hour within 24 hours of plating.
  • The plating thickness is about 10µm – 20µm
  • Majority of the parts are electroplated while military grade parts are solder dipped.

For other questions not addressed by the knowledge base, please submit a technical support request.