The 844S012I-01 is an optimized PCIe, sRIO and Gigabit Ethernet Frequency Synthesizer. The 844S012I-01 uses a 25MHz parallel resonant crystal to generate 33.33MHz - 200MHz clock signals, replacing solutions requiring multiple oscillator and fanout buffer solution. The device supports ±0.25% center-spread, and -0.6% down-spread clocking with two spread select pins (SSC[1:0]). The VCO operates at frequency of 2GHz. The device has three output banks: Bank A with two LVDS outputs, 100MHz – 250MHz; Bank B with seven 33.33MHz – 200MHz LVCMOS/ LVTTL outputs; and Bank C with one 33.33MHz – 200MHz LVCMOS/LVTTL output.

All Banks A, B and C have their own dedicated frequency select pins and can be independently set for the frequencies mentioned above. The low jitter characteristic of the 844S012I-01 makes it an ideal clock source for PCIe, sRIO and Gigabit Ethernet applications. Designed for networking and industrial applications, the 844S012I-01 can also drive the high-speed clock inputs of communication processors, DSPs, switches and bridges. The 843241I-04 is a Serial ATA (SATA)/Serial Attached SCSI (SAS) Clock Generator and a member of the HiPerClocksTM family of high performance devices from IDT. For SATA/SAS applications, a 25MHz crystal is used to produce 150MHz. The 843241I-04 is packaged in a small 8-pin TSSOP, making it ideal for use in systems with limited board space.

特性

  • Two differential LVDS outputs (Bank A), configurable for PCIe (100MHz or 250MHz) and sRIO (100MHz or 125MHz) clock signals
  • Eight LVCMOS/LVTTL outputs (Bank B/C), 18Ω typical output impedance
  • Two REF_OUT LVCMOS/LVTTL clock outputs 23Ω typical output impedance
  • Selectable crystal oscillator interface, 25MHz, 18pF parallel resonant crystal or one LVCMOS/LVTTL single-ended reference clock input
  • Supports the following output frequencies: LVDS Bank A: 100MHz, 125MHz, 200MHz and 250MHz LVCMOS/LVTTL Bank B/C: 33.33MHz, 50MHz, 66.67MHz, 100MHz, 125MHz, 133.33MHz, 166.67MHz and 200MHz
  • VCO: 2GHz
  • Spread spectrum clock: ±0.25% center-spread, and -0.6% down-spread
  • PLL bypass and output enable
  • RMS period jitter: 23ps (maximum), QB outputs
  • Full 3.3V supply voltage
  • -40°C to 85°C ambient operating temperature
  • Available in a lead-free (RoHS 6) compliant package

产品选择

下单器件 ID Part Status Pkg. Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type Buy Sample
Obsolete VFQFPN 56 I 是的 Tray
Availability
Obsolete VFQFPN 56 I 是的 Reel
Availability

文档和下载

文档标题 其他语言 类型 文档格式 文件大小 日期
数据手册与勘误表
844S012i-01 Final Data Sheet 数据手册 PDF 470 KB
应用指南 &白皮书
AN-828 Termination - LVPECL 应用文档 PDF 322 KB
AN-831 The Crystal Load curve 应用文档 PDF 395 KB
AN-846 Termination - LVDS 应用文档 PDF 133 KB
AN-845 Termination - LVCMOS 应用文档 PDF 146 KB
AN-844 Termination - AC Coupling Clock Receivers 应用文档 PDF 170 KB
AN-842 Thermal Considerations in Package Design and Selection 应用文档 PDF 495 KB
AN-803 Crystal Timing Budget and Accuracy for IDT Timing Clock Products 应用文档 PDF 128 KB
AN-840 Jitter Specifications for Timing Signals 应用文档 PDF 442 KB
AN-838 Peak-to-Peak Jitter Calculations 应用文档 PDF 115 KB
AN-839 RMS Phase Jitter 应用文档 PDF 233 KB
AN-832 Timing Budget and Accuracy 应用文档 PDF 131 KB
AN-834 Hot-Swap Recommendations 应用文档 PDF 153 KB
AN-837 Overdriving the Crystal Interface 应用文档 PDF 133 KB
AN-836 Differential Input to Accept Single-ended Levels 应用文档 PDF 120 KB
AN-835 Differential Input with VCMR being VIH Referenced 应用文档 PDF 160 KB
AN-830 Quartz Crystal Drive Level 应用文档 PDF 143 KB
AN-827 Application Relevance of Clock Jitter 应用文档 PDF 1.15 MB
AN-815 Understanding Jitter Units 应用文档 PDF 565 KB
AN-802 Crystal-Measuring Oscillator Negative Resistance 应用文档 PDF 136 KB
AN-801 Crystal-High Drive Level 应用文档 PDF 202 KB
AN-806 Power Supply Noise Rejection 应用文档 PDF 438 KB
AN-805 Recommended Ferrite Beads 应用文档 PDF 121 KB
PCN / PDN
PCN# : A1904-01 Add Greatek, Taiwan as an Alternate Assembly Facility 产品变更通告 PDF 983 KB
PDN# : CQ-18-04 PRODUCT DISCONTINUANCE NOTICE 产品停产通告 PDF 550 KB
PCN# : TB1504-01R1 Qty per Reel Standardization for Selective Packages 产品变更通告 PDF 95 KB
PCN# : TB1504-01 Qty per Reel Standardization for Selective Packages 产品变更通告 PDF 50 KB