The 871002I-02 is a high performance Jitter Attenuator designed for use in PCI Express®™ systems. In some PCI Express® systems, such as those found in desktop PCs, the PCI Express® clocks are generated from a low bandwidth, high phase noise PLL frequency synthesizer. In these systems, a jitter attenuator may be required to attenuate high frequency random and deterministic jitter components from the PLL synthesizer and from the system board. The 871002I-02 has two PLL bandwidth modes: 350kHz and 2200kHz. The 350kHz mode provides the maximum jitter attenuation, but it also results in higher PLL tracking time. In this mode, the spread spectrum modulation may also be attenuated. The 2200kHz bandwidth provides the best tracking skew and will pass most spread profiles, but the jitter attenuation will not be as good as the lower bandwidth modes. The 871002I-02 can be set for different modes using the F_SELx pins as shown in Table 3C. The 871002I-02 uses IDT 3rd Generation FemtoClockTM PLL technology to achieve the lowest possible phase noise. The device is packaged in a small 20 Lead TSSOP package, making it ideal for use in space constrained applications such as PCI Express® add-in cards.

特長

  • Two 0.7V HCSL differential output pairs
  • One differential clock input
  • CLK, nCLK can accept the following differential input levels: LVPECL, LVDS, HSTL, HCSL, SSTL
  • Input frequency range: 98MHz to 128MHz
  • Output frequency range: 98MHz to 640MHz
  • VCO range: 490MHz - 640MHz
  • Cycle-to-cycle jitter: 45ps (maximum)
  • Two bandwidth modes allow the system designer to make jitter attenuation/tracking skew design trade-offs
  • Full 3.3V supply mode
  • -40°C to 85°C ambient operating temperature
  • Available in lead-free (RoHS 6) package

製品選択

発注型名 Part Status Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type 購入/サンプル
Obsolete 20 I はい Tube
Availability
Obsolete 20 I はい Reel
Availability

ドキュメント&ダウンロード

タイトル 他の言語 分類 形式 サイズ 日付
データシート
871002I-02 DATASHEET データシート PDF 440 KB
PCN / PDN
PDN# : CQ-19-01(R1) Quarterly Market Declined PDN 製品中止通知 PDF 1014 KB
PDN# : CQ-19-01 Quarterly Market Declined PDN 製品中止通知 PDF 537 KB
PCN# : A1602-01(R1) Add Greatek Taiwan as Alternate Assembly 製品変更通知 PDF 611 KB
PCN# : A1602-01 Add Greatek Taiwan as Alternate Assembly 製品変更通知 PDF 611 KB
PCN# : A1511-01(R1) Add SPEL India as Alternate Assembly Location 製品変更通知 PDF 596 KB
PCN# : A1511-01 Add SPEL India as Alternate Assembly Location 製品変更通知 PDF 544 KB
PCN# : TB1504-01R1 Qty per Reel Standardization for Selective Packages 製品変更通知 PDF 95 KB
PCN# : TB1504-01 Qty per Reel Standardization for Selective Packages 製品変更通知 PDF 50 KB
PCN# : A1309-01 Changed of Traceability Mark Format 製品変更通知 PDF 439 KB
PCN# : TB1303-02 Change of Tape & Reel Packing Method for Selective Products 製品変更通知 PDF 361 KB
Downloads
871002I-02 IBIS Model モデル-IBIS ZIP 45 KB