The 601-02 is a low cost, low phase noise, high performance clock synthesizer for any application that requires low phase noise and low jitter. The 601 is IDT's lowest phase noise multiplier. Using IDT's patented analog and digital Phase Locked Loop (PLL) techniques, the chip accepts a 10–27 MHz crystal or clock input, and produces output clocks up to 170 MHz at 3.3 V. A separate supply pin is provided so that the output can be 2.5 V. This product is intended for clock generation. It has low output jitter (variation in the output period), but input to output skew and jitter are not defined nor guaranteed. For applications which require defined input to output timing, use the 670-01.

Features

  • Packaged in 16-pin SOIC (Pb free)
  • Uses fundamental 10 - 27 MHz crystal or clock
  • Patented PLL with the lowest phase noise
  • Output clocks up to 170 MHz at 3.3 V
  • Output Enable function tri-states outptus
  • Low phase noise: -132 dBc/Hz at 10 kHz
  • Low jitter - 18 ps one sigma
  • Full swing CMOS outputs with 25 mA drive capability at TTL levels
  • Advanced, low power, sub-micron CMOS process
  • Industrial temperature range (-40 to +85°C)
  • 3.3 V or 5 V core VDD. Output clock can operate down to 2.5 V

Product Options

注文可能な製品ID Part Status Pkg. Code Pkg. Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type 購入/サンプル
601M-02ILF Active DCG16 SOIC 16 I Yes Tube
Availability
601M-02ILFT Active DCG16 SOIC 16 I Yes Reel
Availability

Documentation & Downloads

タイトル 他の言語 タイプ 形式 サイズ 日付
データシート
601-02 Datasheet Datasheet PDF 246 KB
アプリケーションノート、ホワイトペーパー
AN-828 Termination - LVPECL Application Note PDF 322 KB
AN-831 The Crystal Load curve Application Note PDF 395 KB
AN-845 Termination - LVCMOS Application Note PDF 146 KB
AN-844 Termination - AC Coupling Clock Receivers Application Note PDF 170 KB
AN-842 Thermal Considerations in Package Design and Selection Application Note PDF 495 KB
AN-840 Jitter Specifications for Timing Signals Application Note PDF 442 KB
AN-803 Crystal Timing Budget and Accuracy for IDT Timing Clock Products Application Note PDF 128 KB
AN-839 RMS Phase Jitter Application Note PDF 233 KB
AN-838 Peak-to-Peak Jitter Calculations Application Note PDF 115 KB
AN-837 Overdriving the Crystal Interface Application Note PDF 133 KB
AN-836 Differential Input to Accept Single-ended Levels Application Note PDF 120 KB
AN-835 Differential Input with VCMR being VIH Referenced Application Note PDF 160 KB
AN-834 Hot-Swap Recommendations Application Note PDF 153 KB
AN-832 Timing Budget and Accuracy Application Note PDF 131 KB
AN-830 Quartz Crystal Drive Level Application Note PDF 143 KB
AN-815 Understanding Jitter Units Application Note PDF 565 KB
AN-827 Application Relevance of Clock Jitter Application Note PDF 1.15 MB
AN-802 Crystal-Measuring Oscillator Negative Resistance Application Note PDF 136 KB
AN-806 Power Supply Noise Rejection Application Note PDF 438 KB
AN-805 Recommended Ferrite Beads Application Note PDF 121 KB
AN-801 Crystal-High Drive Level Application Note PDF 202 KB
PCN / PDN
PCN# : A1602-01(R1) Add Greatek Taiwan as Alternate Assembly Product Change Notice PDF 611 KB
PCN# : A1602-01 Add Greatek Taiwan as Alternate Assembly Product Change Notice PDF 611 KB
PCN# : A1208-01R1 Gold to Copper Wire Product Change Notice PDF 254 KB
PCN# A-0607-06 MMT Thailand as Alternate Assembly Facility for PLCC, SOIC 150mil/300mil Product Change Notice PDF 223 KB
Downloads
601-02 3.3V IBIS Model Model - IBIS ZIP 3 KB
601-01 3.3V IBIS Model Model - IBIS ZIP 3 KB
601-01 5V IBIS Model Model - IBIS ZIP 3 KB
601-01 5V IBIS Model Model - IBIS ZIP 3 KB
601-01 3.3V IBIS Model Model - IBIS ZIP 3 KB
その他資料
Timing Solutions Products Overview Overview PDF 4.11 MB
IDT Products for Radio Applications (日本語) English Product Brief PDF 2.34 MB
IDT Clock Generation Overview (日本語) English Overview PDF 1.83 MB
IDT Clock Distribution Overview (日本語) English Overview PDF 3.79 MB

Boards & Kits