NOTICE - The following device(s) are recommended alternatives:

The SMOD electronic module creates an easy way to evaluate the SGAS sensor. An MCU-based electronic module encompasses all measurement and control aspects of SGAS sensors. The factory configured SMOD functions with a specific SGAS sensor type. The SMOD board connects to a Windows PC via a bi-directional USB connection; supplied with an application facilitating SMOD operation. The sensor response is both native resistance units and linearized concentration units.  Sensor operating parameters are customizable.

Features

  • 8.9cm² total PCB area
  • Can be operated by USB power only
  • Embedded microcontroller/EEPROM combination enables "no setup required" operation
  • Supports all advanced modes of sensor operation (feedback heater control, temperature and sensor measurement sequencing
  • Simple ASCII-based communication protocol allows easy integration with external controllers
  • Full-speed USB interface standard; optional I²C and UART interfaces are available

Product Options

注文可能な製品ID Part Status 購入/サンプル
SMOD707KITV1 Last Time Buy
Availability

技術資料

タイトル 他の言語 タイプ 形式 サイズ 日付
データシート
SMOD707 Datasheet Datasheet PDF 417 KB
ユーザーガイド
SMOD7xx Evaluation Kit User Manual Manual PDF 539 KB
PCN / PDN
PDN# : AI-19-03 Product Discontinuation Notice Product Discontinuation Notice PDF 105 KB

ソフトウェア/ツール

タイトル 他の言語 タイプ 形式 サイズ 日付
SMOD Firmware 0.4.4 Software ZIP 100 KB
SMOD Application Software 1.3.0 Software ZIP 248.46 MB