Additive jitter is defined as the added amount of jitter to the input signal caused by the device itself and can be calculated as:
Total Additive Jitter = sq root ((output clock jitter)² - (input clock rms jitter)²)
It assumes that the noise processes are random and the input noise is not correlated to the output noise. Additive jitter must be measured with a clock source where phase noise is below the noise floor of the buffer itself. Refer to application note AN-804 for more details. For questions not answered by the Knowledge Base, please submit a technical support request.


タイトル 他の言語 分類 形式 サイズ 日付
AN-804 IDT Clock Buffers Offer Low Additive Phase Jitter アプリケーションノート PDF 246 KB