The ADC1004S030/040/050 are a family of 10-bit high-speed low-power Analog-to-Digital Converters (ADC) for professional video and other applications. They convert the analog input signal into 10-bit binary-coded digital signals at a maximum sampling rate of 50 MHz. All digital inputs and outputs are Transistor-Transistor Logic (TTL) and CMOS compatible, although a low-level sine wave clock input signal is allowed. The device requires an external source to drive its reference ladder. If the application requires that the reference is driven via internal sources, NXP Semiconductors recommends you use one of the ADC1003S030/040/050 family.

Features

  • 10-bit resolution
  • 3 V to 5 V CMOS digital outputs
  • DC sampling allowed
  • External reference voltage regulator
  • High signal-to-noise ratio over a large analog input frequency range (9.4 effective bits at 4.43 MHz full-scale input at fclk = 40 MHz)
  • In-Range (IR) CMOS output
  • Low analog input capacitance, no buffer amplifier required
  • Low-level AC clock input signal allowed
  • No missing codes guaranteed
  • No sample-and-hold circuit required
  • One clock cycle conversion only
  • Power dissipation only 175 mW (typical)
  • Sampling rate up to 50 MHz
  • TTL and CMOS levels compatible digital inputs

Product Options

下单器件 ID Part Status Pkg. Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type 封装 Buy Sample
ADC1004S030TS-C18 Obsolete SSOP 28 I Yes Reel Package Info
Availability

Documentation & Downloads

文档标题 他の言語 Type 文档格式 文件大小
数据手册与勘误表
ADC1004S SER Datasheet Datasheet PDF 467 KB
PCN / PDN
PDN# : DC-14-01 PRODUCT DISCONTINUANCE NOTICE Product Discontinuation Notice PDF 538 KB

Boards & Kits

Part Number 文档标题 Type 公司
ADC1004S030 ADC1004S030 demo board