The 8V19N491-24 is a fully integrated FemtoClock NG Jitter Attenuator and Clock Synthesizer that is designed as a high-performance clock solution for conditioning and frequency/phase management of wireless base station radio equipment boards. The device is optimized to deliver excellent phase noise performance as required in GSM, WCDMA, LTE, LTE-A and 5G radio board implementations.

The device supports JESD204B/C subclass 0 and 1 clocks. A two-stage PLL architecture supports both jitter attenuation and frequency multiplication. The first stage PLL is the jitter attenuator and uses an external VCXO for best possible phase noise characteristics. The second stage PLL locks on the VCXO-PLL output signal and synthesizes the target frequency.

The 8V19N491-24 supports the clock generation of high-frequency clocks from the selected VCO and low-frequency synchronization signals (SYSREF). SYSREF signals are internally synchronized to the clock signals. Delay functions exist for achieving alignment and controlled phase delay between system reference and clock signals and to align/delay individual output signals. The two redundant inputs are monitored for activity. Four selectable clock switching modes are provided to handle clock input failure scenarios. Auto-lock, individually programmable output frequency dividers, and phase adjustment capabilities are added for flexibility. The device is configured through a selectable 3/4-wire SPI interface and reports lock and signal loss status in internal registers and via an lock detect (LOCK) output. Internal status bit changes can also be reported via the nINT output. The 8V19N491-24 is ideal for driving converter circuits in wireless infrastructure, radar/imaging and instrumentation/medical applications.

For information regarding evaluation boards and material, please contact your local IDT sales representative.


  • High-performance clock RF-PLL with support for JESD204B/C
  • Optimized for low phase noise: -153dBc/Hz (1MHz offset), 245.76MHz clock
  • Integrated phase noise of 61fs RMS typical (12kHz–20MHz)
  • Dual-PLL architecture
  • First PLL stage with external VCXO for clock jitter attenuation
  • Second PLL with internal FemtoClockNG PLL: 2457.6MHz
  • Five output channels with a total of 15 outputs
  • Configurable integer clock frequency dividers
  • Low-power LVPECL/LVDS outputs support configurable signal amplitude, DC and AC coupling, and LVPECL, LVDS line terminations techniques
  • Phase delay circuits
  • Redundant input clock architecture with two inputs
  • SYSREF generation modes include internal and external trigger mode for JESD204B/C
  • Supply voltage: 3.3V
  • SPI interface, 3/4 wire configurable


下单器件 ID Part Status Pkg. Code Pkg. Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type Buy Sample
Active NLG88P2 VFQFPN 88 I 是的 Tray
Active NLG88P2 VFQFPN 88 I 是的 Reel
Active NLG88P2 VFQFPN 88 I 是的 Reel


文档标题 其他语言 类型 文档格式 文件大小 日期
8V19N491-24 Datasheet 数据手册 PDF 948 KB
8V19N49x Hardware Design Guide 指南 PDF 1.30 MB
应用指南 &白皮书
AN-952 8V19N480_490 Design Guide for JESD204B Output Phase Alignment and Termination 应用文档 PDF 975 KB
AN-842 Thermal Considerations in Package Design and Selection 应用文档 PDF 495 KB
AN-838 Peak-to-Peak Jitter Calculations 应用文档 PDF 115 KB
AN-839 RMS Phase Jitter 应用文档 PDF 233 KB
AN-827 Application Relevance of Clock Jitter 应用文档 PDF 1.15 MB
AN-815 Understanding Jitter Units 应用文档 PDF 565 KB
AN-806 Power Supply Noise Rejection 应用文档 PDF 438 KB
AN-805 Recommended Ferrite Beads 应用文档 PDF 121 KB
8V19N480-490 Timing Commander Personality File (v5.1.0) 软件 ZIP 4.59 MB
Timing Solutions Products Overview 概览 PDF 4.11 MB
8V19N49x RF Sampling Clocks with Jitter Attenuation Overview 概览 PDF 1.21 MB
IDT Products for Radio Applications 日本語 产品简述 PDF 2.34 MB
IDT Clock Generation Overview 日本語 概览 PDF 1.83 MB
IDT Clock Distribution Overview 日本語 概览 PDF 3.79 MB
RF-Grade Clock Jitter Attenuator and Frequency Synthesizer Product Brief 产品简述 PDF 847 KB