Spread spectrum capability is contained within the Fractional-N output dividers associated with each output clock. When applied, triangle wave modulation of any spread spectrum amount, SS%AMT, from ±0.25% to ±2.5% center spread and -0.5% to -5% down spread between 30 and 63kHz may be generated, independent of the output clock frequency. Five variables define Spread Spectrum in FODx (see Table below).
 
 
To calculate the spread spectrum registers, first determine the value in decimal of the FOD output divider, N, for the nominal output frequency without spread spectrum. The VCO frequency is divided by two to account for a fixed divide by 2 between the VCO output and the input to the FOD. Convert the integer portion into hex to define ODx_intdiv.
Refer to application note AN-862 for more details. For other questions not addressed by the Knowledge Base, please submit a technical support request.

Documents

文档标题 他の言語 文档类型 文档格式 文件大小
应用指南 &白皮书
AN-862 5P49V5901 Register Programming Guide Application Note PDF 176 KB